Go Kart Torque Converters

Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Torq-A-Verter
Comet Torque Converter 30 Series small engi belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
Go Kart Torque Converter Kit is a direc
REPLACEMENT:nd fits all Model??of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving moy from burd up CC units
Comet 30 Series Torque Converter kit bolts on to most engis with a horizontal shaft including: Briggs, Clinton, Honda and clos, Kohler, Lifan, Robin, and Tecumseh motors. Driver clutch bore: 1″(24.5mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain.
WARNING – IF YOU PURCHASE THIS KIT AND BURN THROUGH BELTS, THEN YOU HAVE PURCHASED THE WRONG SERIES TORQUE CONVERTER. ALSO – THIS UNIT DOES NOT ED OR COME WITH THE BRONZE IDLER BUSHING: THIS PART IS ONLY FOR THE 3/4″ KIT. THIS KIT MAY ED MODIFICATION TO FIT YOUR ENGI – NO OF THE REASONS ARE A DEFECT, AND WE WILL DISPUTE FOR NO REFUND.
Bullet Lis 1″ torque converter replaces Comet TAV2 30 – 100 Torq-A-Verter Model??218354A, 218355A TAV2 30-75. It is also is
REPLACEMENT:or Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more Bullet Lis 1″ go kart clutch is an asymetrical inli small engi clutch that replaces Comet TAV2 30 – 100 Torq A Verters. This clutch will help you get more power of your small engi by reducing engi load with arly a 10 – 1 overdirve. A torque converter acts similar to a transmission, allowing higher speeds of your small engi, and smoother acceleration.Small engi Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches. This torque converter fits a 1″ shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engis producing 8 HP – 13 HP Model??: 1″ Bore, 35 Chain, 12 Tooth Model??: 1″ Bore, 40/41 Chain, 10 ToothEngi compatability: Bullet Lis Torque Converter is compatible on most engi with horizontal shaft.Specifications:Driven unit: Dia. 157mm Drive clutch bore: 1″ Belt: Asymmetrical type Top width: 19mm(3/4″) Sprocket teeth: Choice of 10 teeth or 12 teeEngagement range: 2350??200 RPM Recommended engi: 8HP – 13HP engi, 1″shaft with flat keyThe Torque Converter assembly includes:Driver Unit:1set Driven Unit:1set V-Belt:1pc Driven Shaft & Gear:1set Side Retair Plate:1pc Torque Converter Cover:1pc InstructionsAll respective trademarks and registered trademarks appearing on this website belong to their respective owrsProduct does not ed bronze idler bushing.