Go Kart Clutches

Centrifugal Clutch 3/4″ Bore 12 Tooth for 35 Chain Common clutch for 2-7 HP engis 2300??300 PRM
Centrifugal Clutch 3/4″ Bore #35 Chain 12 TootCompatible With:onda GX160 GX200 GX140 GX120 GC160 GC190 Harbor Freight Greyhound 196cc Harbor Freight 212cc
The Go Kart Clutch kiCompatible With:riggs and Stratton Tecumseh engis and 2-6.5 HP with 3/4″ shaft Tecumseh Engis.Also fits any other engis with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clos, 6.5 HP clos and 4-7HP motors in all brands.
Centrifugal Clutch 3/4″ Bore #35 Chain 12 Tooth for Go Karts Mini Bike Replace Parts,3 4 inch Bar Centrifugal Clutch Performance Parts,Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3 4 Bore 12 Tooth #35 Chain
Go Kart Clutch 3/4 Bore 12T for #35 Chain, 212 Engi Centrifugal Clutch, Up to 6.5 HP, Perfect for Go Kart, Mini Bike and Fun Kart EngiThe items are the same as the pictures.This Kit Includes:1 x 12 teeth centrifugal clutch
Centrifugal clutch desigd to be used on o wheel karts with rear tires no larger than 15″” tall, and engis 2hp-7hp.
3/4″” bore 12 Teeth For # 35 Chain
This Clutch Will Fit 2 – 6.5 HP Engis Honda GC160, GC190, GX120, GX140, GX160, GX200 Also will fit Briggs & Stratton and 2 – 6.5 HP With 3/4″” Shaft Also Will Fit Tecumseh Engis 2 – 6.5 HP With 3/4″” Shaft And Any Other Engis With 3/4 Crank Shaft and 3/16″” Key Way. Package includes: 1 x Go Kart Clutch   
FITMENT??2-6.5hp Honda & Honda clod engis GC160, GC190, GX120, GX140, GX160, GX200 Perfect for Go Kart Minibike Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior) Common clutch for 3.5-7hp engis using #35 Chain Briggs & Stratton and 2 – 6.5 HP with 3/4″” Shaft Tecumseh Engis 2 – 7 HP with 3/4″” ShaftNote:The Centrifugal Clutch 3/4″” eds be oiled before use. Before ordering please check your crankshaft size. Don’t put oil inside the clutch holes: The holes on the drum are to let the hot air out of the clutch. DO NOT SQUIRT OIL IN THESE HOLES. When oil gets in the drum portion of the clutch it will cause excessive slippage, which means undue heat will be gerated.
Warm Tips:
About the Clutch Slipping:
Don’t try and reduce a go-kart speed by limiting the travel of the gas pedal or by putting a restrictor in the carburetor to limit full rpm. Either of these methods will result in the clutch slipping, which is self-destructive. A clutch eds full rpm to lock up as quickly as possible to be able to start to cool down. To slow down a go-kart you would ed to purchase a gear reduction unit, which is like training wheels on a go-kart until the driver get