Go Kart Clutches

Centrifugal Go Kart Clutch Kit Minibike 3/4 5/8 Bore 10T 11T 12T Chain #35 40 41
Lot Go Kart Minibike Centrifugal Clutch 3/4 5/8 Bore 10T 11T 12T Chain #35 #40 #41
Set Screws and Chain NOT Included.
Please choose the style you want.
3/4″ Bore 10T #40#41 Chain
Centrifugal Clutch 10 tooth, 3/4″ bore, #40/41/420 chain with 3/16 key built in.
Common clutch for 3.5-7hp engis using #40/41/420 chain.
Mounts onto crankshaft using bolt and washer on the end of the crankshaft.
Our clutch assembly with 3/4″ shaft for 163cc 5.5 Hp & 196cc 6.5 Hp Engis is the OE
REPLACEMENT:lutch assembly
used on all versions of the Baja Mini Bike, including the Baja Heat, Mini Baja, and the Baja Warrior.
It iCompatible With:oth the MB165 and the wer MB200 Model??
This item is also a perfec
REPLACEMENT:art on many small utility 163cc 5.5 Hp and 196cc 6.5 Hp engis.
Baja Part Number: 165-046
Compatibility:
Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior)
3/4″ Bore 12T #35 Chain
3/4″ Centrifugal Clutch. 12 Teeth # 35 Chain
This Clutch Will Fit 2 – 6.5 HP Engis Honda GC160, GC190, GX120, GX140, GX160, GX200
Also will fit Briggs & Stratton and 2 – 6.5 HP With 3/4″ Shaft
Also Will Fit Tecumseh Engis 2 – 6.5 HP With 3/4″ Shaft
And Any Other Engis With 3/4 Crank Shaft and 3/16″ Key Way.
5/8″ Bore 10T #40#41 Chain
Centrifugal Clutch 10 tooth, 5/8″ bore, #40/41/420 chain with 3/16 key built in.
Common clutch for 2-3hp engis using #40/41/420 chain.
Mounts onto crankshaft using bolt and washer on the end of the crankshaft does
not have set screws. Please double check your crankshaft size ,
The 5/8″ is used mostly on older engis. Clutch only, does not come with chain.
5/8″ Bore 11T #35 Chain
Centrifugal Clutch 11 tooth, 5/8″ bore, #35 chain Most go-karts use the 5/8″ bore clutches.
These are used on 2hp and some older 3hp engis.
Before ordering please check your crankshaft size.