Go Kart Clutches

This clutch is used primarily on Go Kart and Mini Bike, Lawnmower and Fun Kart, also it can be used for many other applications
Tooth:14; Work with #40/41/420 Chain (Chain Not included)
1″ bore Desigd for 6.5hp 212CC Engis
Made of high quality iro
Material:hich is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
Package Included:1 x Go Kart Centrifugal CluFeature: Assembly used on all versions of the Baja Mini Bike, including the Baja Heat, Mini Baja, and the Baja Warrior.It iCompatible With:oth the MB165 and the wer MB200 Model??This item is also a perfec
REPLACEMENT:art on much small utility 163cc 5.5 Hp and 196cc 6.5 Hp engis.
Specification: Shaft size: 1″BoreChain Size: 40/41/420ChainTooth Count: 14 ToothClutch Diameter: 107mmClutch Height: 56 mmEngagement Speed: 2300??300 RPMRecommended Engi: 2HP – 6.5HP, 1″ shaft with flat key
FITMENT?? Honda GX160, GX200, GX 140, GX120, GC160, GC190Harbor Freight Greyhound 196ccHarbor Freight Predator 212ccBriggs and Stratton Tecumseh EngisPerfect For Go Kart Minibike Baja Mini Bike MB165 & MB200
Oiling the clutch is extremely important Behind the snap ring, xt to the sprocket teeth at the end of the clutch. There’s an internal bronze bushing behind the snap ring that requires lubrication and it’s up to you to put it there each timeIt’s a good idea to oil the chain at the same time. If the chain gets kinky from lack of oil it should be replaced before it damages the clutch sprocket.
Engis Common clutch for 3.5-7hp engis using 40/41/420ChainBriggs & Stratton and 2 – 6.5 HP with 1″ShaftTecumseh Engis 2 – 7 HP with 1″ShaftOther engis with 1″crank shaft and 3/16″ key wayMost 5.5 HP clos, 6.5 HP clos and 4-7HP motors in all brand
Also Fits For AlsCompatible With: crank shaft and 1″ key way, most 5.5 HP clos, 6.5 HP clos and 4-7HP motors in all brands
Set Screws NOT Included Clutch does not ed set screws as long as the end of the crankshaft is threaded to accept a bolt. Most go kart clutches are held onto the shaft with a bolt and larger washer. Extra washers if eded are used on the crankshaft to space clutch
About Sizes&Chain Fits??40/41/420ChainDurable, Maximum torque, Wear-resisting, Fast heat dissipation
KindlNote:
The Centrifugal Clutch 1″ eds to be oiled before use.Before ordering please check your crankshaft size.Don’t put oil inside the clutch holes: The holes on the drum are to let the hot air out of the clutchWhen oil gets in the drum portion of the clutch it will cause excessive slippage, which means undue heat will be gerated.Don’t try and reduce a go kart speed by limiting the travel of the gas pedal or by putting a restrictor in the carburetor to limit full rpm.When oil gets in the drum portion of the clutch it will cause excessive slippage, which means undue heat will be gerated.
Ameetaa
Ameetaa
Ameetaa
Ameetaa
Sprocket
14T 10T 10T 12T
Chain
40/41/420 Chain 40/41/420 Chain 40/41/420Chain 35 Chain
Diameter
1″Bore 5/8″Bore 3/4″Bore 3/4″Bore
Dia
107mm 107mm 106.7mm 106.7mm
Height
56.6mm 55.5mm 54.4mm 56mm
Engi
212cc 212cc 212cc 212cc
Go with Chain
NO NO YES YES