Go Kart Clutches

Compatible for Go Kart and Mini Bike, Lawnmower and Fun Kart
Compatible for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh Engis
Also fits any other engis with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clos, 6.5 HP clos
Tooth: 10T sprocket for #40/41/420 chain
Package Included: 1 x Centrifugal Clutch; 1 x #40/41/420 ChFeature: Assembly used on all versions of the Baja Mini Bike, including the Baja Heat, Mini Baja, and the Baja Warrior.
It iCompatible With:oth the MB165 and the wer MB200 Model??
This item is also a perfec
REPLACEMENT:art on much small utility 163cc 5.5 Hp and 196cc 6.5 Hp engis.
Specification: Shaft size: 3/4″ BoreChain Size: 40/41/420Chain Tooth Count: 10 ToothClutch Diameter: 106.7 mmClutch Height: 56 mmEngagement Speed: 2300??300 RPMRecommended Engi: 2HP – 6.5HP, 3/4″ shaft with flat key
FITMENT?? Honda GX160, GX200, GX 140, GX120, GC160, GC190Harbor Freight Greyhound 196ccHarbor Freight Predator 212ccBriggs and Stratton Tecumseh EngisPerfect For Go Kart Minibike Baja Mini Bike MB165 & MB200
Oiling the clutch is extremely important Behind the snap ring, xt to the sprocket teeth at the end of the clutch. There’s an internal bronze bushing behind the snap ring that requires lubrication and it’s up to you to put it there each timeIt’s a good idea to oil the chain at the same time. If the chain gets kinky from lack of oil it should be replaced before it damages the clutch sprocket. A w chain is cheaper than a w clutch.
Package Includes:
1 x Centrifugal Clutch
1 x #40/41/420 Chain
Engis
Common clutch for 3.5-7hp engis using #35 Chain
Briggs & Stratton and 2 – 6.5 HP with 3/4″ Shaft
Tecumseh Engis 2 – 7 HP with 3/4″ Shaft
Other engis with 3/4 crank shaft and 3/16″ key way
Most 5.5 HP clos, 6.5 HP clos and 4-7HP motors in all brands
Also Fits For
AlsCompatible With:/4 crank shaft and 3/16″ key way, most 5.5 HP clos, 6.5 HP clos and 4-7HP motors in all brands
Chian
The product contains a set of high-quality 40/41/420Chain
KindlNote:
Perfect for Go Kart, Mini bike, Fun KartThe Centrifugal Clutch 3/4″ eds to be oiled before use.Before ordering please check your crankshaft size.Don’t put oil inside the clutch holes: The holes on the drum are to let the hot air out of the clutchDO NOT SQUIRT OIL IN THESE HOLES. When oil gets in the drum portion of the clutch it will cause excessive slippage, which means undue heat will be gerated.
Ameetaa
Ameetaa
Ameetaa
Ameetaa
Sprocket
10T 12T 14T 10T
Chain
40/41/420Chain 35Chain 40/41/420Chain 40/41/420Chain
Diameter
3/4Bore 3/4Bore 1″Bore 5/8″Bore
Dia
106.7mm 106.7mm 107mm 107mm
Height
54.4mm 56mm 56.6mm 55.5mm
Engi
212cc 212cc 212cc 212cc
Go with Chain
YES YES NO NO