IKART PARTS

Product

Categories

Billet Alloy Stroker Crankshaft Assembly for 6.5 HP Clone GX200 / Predator 212cc Engine

SKU 525 A6573 Category Tag

SPREAD THE LOVE

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on odnoklassniki

Description

This crankshaft is machined from a solid bar of alloy steel and will give you .175″more stroke than the stock Honda/Clone 196cc crankshaft with far more superior strength.
This is the strongest material used for a small engine crank.
When installed in a Harbor Freight Predator 212cc you will net a +.136″ stroke due to the Predator’s 55mm stroke OEM crank.
You will need at minimum, our connecting rod #6265 or #6765 and a Wiseco 11132PS or 17-2677 for Honda/Clone or (11132P94/17-2756 in a 212 Predator) and a 6521 HD wrist pin to run this crank.
The crank is properly balanced when run with these parts.
Larger pistons and/or different rod lengths will require the crank to be re-balanced.
Requires A6573 Stroker Crank
* Pre-clearanced for the compression release.
*The 11132PS and P94 pistons have a thick dome which is designed to be cut down to your engine’s deck height when using connecting rod #6265. You must cut down the top of the piston by test-installing the parts and measuring to see how much needs to be taken off.
* NOW AVAILABLE ARC connecting rod #6765 3.525″ “Drop in” rod that does not require machining of the 11132P pistons in most applications, and can be used with the 17-2677 and 17-2756 3 ring Wiseco pistons for extra ring seal… WARNING “Do Not machine the top of the 3 ring pistons”
* The rod and crank are pre-clearanced for for most cam applications but some additional machining may be required with high lift/high duration cams
* Crank is designed to be used with an ADJUSTABLE HUB flywheel tapered for a Honda GX200/Clone 196. (Predator flywheels WILL NOT work)
* You must use flywheel key number 903704. Offset keys for the Honda/Clone/Predator cranks WILL NOT work.
* If you need higher timing with a Non Adjustable Flywheel than the 903704 key will offer, you will need to lap the flywheel to the crank, set the timing with a degree wheel and torque it to spec WITHOUT A KEY.
*** Outer 3rd / 4th bearing supports highly recommended ***

Contact Us