IKART PARTS

Product

Categories

Inferno Fire (Needle Bearing) 3/4" Bore Racing Clutch from

SKU 3708 404804 Category Tag

SPREAD THE LOVE

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Share on reddit
Share on odnoklassniki

Description

All New Fire Clutch from Racing.
Features:
The FIRE has a bonded high performance friction lining that makes a smooth transition from the slip you need for optimal acceleration off the corners.
The clutch includes a special oil & grease shield to keep contamination off of the shoe surface.
Brand new heat treated sprocket to accept the needle bearing.
The needle bearing helps the kart roll easier through the corners and a better release of the clutch entering the corner.
All of these upgrades improve acceleration off the corner and reduce the push through the corners.
Upgraded the inner race with a material change and heat treatment so you can get optimal performance and long life.
Clutches will come standard with the mounting hardware and correct spacers to quickly mount to your LO206.
The hardened race and spacers that come with the clutch will clamp the clutch tight to the crankshaft to minimize fretting.
The high performance friction lining is cleaned with brake cleaner so maintenance is a breeze.
Product Specs:
3/4″ Bore
Tune-able
Includes (4) White Springs & (4) Black Springs
Sprocket Options: #35 or #219 chain
Implements shoes with removable weights to fine tune track performance.
Optional weight and spring combinations offer infinite tuning possibilities.
*11T #35 DRIVE SPROCKET HAS NO BEARING, BUT DOES REQUIRE INFERNO STYLE RACE
Engagement Speeds:
– Speeds are listed as the point at which the shoes touch the drum, NOT LOCK UP RPM**
Black ?C 3800 RPM
White ?C 2800 RPM
Yellow ?C 2300 RPM
Orange ?C1900 RPM
Red ?C 1400 RPM
Green ?C1200 RPM
Note: Speeds shown are a FIRE shoe with no added weight.

Contact Us