Fury (Needle Bearing) 3/4" Bore Racing Clutch from Hilliard

All New Fury Clutch from Racing.
Features:
The clutch includes a special oil & grease shield to keep contamination off of the shoe surface.
Brand new heat treated sprocket to accept the needle bearing.
The needle bearing helps the kart roll easier through the corners and a better release of the clutch entering the corner.
Upgraded the inner race with a material change and heat treatment so you can get optimal performance and long life.
Clutches will come standard with the mounting hardware and correct spacers to quickly mount to your LO206.
The hardened race and spacers that come with the clutch will clamp the clutch tight to the crankshaft to minimize fretting.
The high performance friction lining is cleaned with brake cleaner so maintenance is a breeze.
Product Specs:
3/4″ Bore
Includes (4) White Springs & (4) Black Springs
Sprocket Options: #35 or #219 chain
*11T #35 DRIVE SPROCKET HAS NO BEARING, BUT DOES REQUIRE STYLE RACE
**There are many variables that play into the performance of a clutch. Tire size, rear sprocket size and rear drive set-up are a few of the main variables that could affect clutch performance. If you are using large tires or a small sprocket, your vehicle may require a belt drive system. Clutch performance is not based soley on the engine size.**