1. Place the go-kart on a level surface and turn off the engine.

2. Locate the two mounting points for the belt. They are usually located on the side of the frame and the engine.

3. Take the old belt off and discard it.

4. Thread the new belt through the two mounting points.

5. Pull the belt tight and secure it with a belt clamp or zip tie.

6. Start the engine and check to make sure the belt is running smoothly.

7. If the belt is not running smoothly, adjust the tension by loosening or tightening the belt clamp or zip tie.

8. Once the belt is running smoothly, turn off the engine and double check all the connections.

9. Replace the seat and any other parts that were removed to install the belt.

10. Finally, enjoy your new go-kart belt!

“Keyword”
“how to install the kart belt in a car”
“how to install the kart belt on a motorcycle”